Fault and maintenance of the printer ribbon

July 30th, 2010 by admin
0

Printer ribbon is more familiar with a printing supplies. From the earliest mechanical percussive English printer to the computer later pin printers, printer ribbons are used. Printer ribbon works is to use stylus printer machine within the first English typewriter or dot matrix firing pin hit parts of the letters to hit print printer ribbons, produced at the printing paper printing.
the composition of the printer ribbon is very simple to knit and nylon fiber as raw materials percent of the ink soaked through with base, made of stain. good printer ribbon, with a base hit should be durable, elastic large print can not afford long hair, keep lines, can not afford to lotus leaf edge. It’s performance was mainly base surface is smooth with no protruding fiber end, Density uniform and tight, cutting edge straight and uniform, no char, rather than the phenomenon. hand touch: a good band-based soft and delicate, there is a sense of smoothness. tensile and good elasticity, recovery is good. bad break spinning printer ribbons based powerful, touching hair feel hard time, cutting edge uneven, with a side of char, rather powerful, flexible when drawing small, poor recovery, printing often entrainment, easy from lotus leaf edge, resulting in blocking the needle, cartridge and other phenomena.
apart with a base, the ink printer ribbon is an important factor in good or bad. good ink particles is very small, will not lead to plug pinholes, good liquidity, PH values are uniform, when coated ink absorption is strong, moisture is good, durable playing and printing the color transition slowly. good organic non-toxic inks will not corrosive, does not smell, after transfection with non-sticky, easy to dry. bad ink particles large, thick sticky hands, stained with quit after the hanging, produced between the adhesive tape was powerful, easy to plug the pinhole when printing, so that the needle can not be flexible and stretch, which will break the needle. it is to judge the use of high-quality ink printer ribbon hand to touch when the fingers will not leave obvious traces of ink. before and after the printing is not very significant differences. and inferior ink, when the hand touch feeling greasy fingers full of ink marks, appears to have enough ink, but the color will appear in print Shique important phenomenon, that is touching a piece of printing paper will be fuzzy. will not only result in poor quality printing inks are poor, and it can also print the needle along the pilot hole into the printing and curing scalp sutural, plug the printer needle, causing the printer can not print properly, serious cases may result in increased resistance of the print head out the needle and needle broken print, print needle parallel to the tank was crushed, the print head or printer ribbon motor driver chips were burned and other serious fault.
a brand name of the original printer ribbons, but tens of dollars, the damage caused by the printer is the loss of needles heavy, so users do not get petty at the time of purchase, thus runs the risk.
used for photo printing dye-sublimation card printer supplies is sometimes also called the printer ribbon, but it works and the prices of our daily said printer ribbons are two different things, should not be confused.

Posted in Uncategorized

Leave a Reply